Solved

I am confused about this netapp syntax

Posted on 2011-03-08
3
463 Views
Last Modified: 2012-05-11
I am confused about this netapp syntax

vif create lacp VIFA1 -b ip e0a e0b e0c e0d


what is the –b and ip mean ?
0
Comment
Question by:NAMEWITHELD12
  • 2
3 Comments
 
LVL 42

Expert Comment

by:paulsolov
ID: 35072629
it defines balancing

vif create [ single | multi ] vif_name [ -b {rr|mac|ip} ] [ interface_list


IP based . The outgoing interface is selected on the basis of the filer and client's IP address

-
MAC based . The outgoing interface is selected on the basis of the filer and client's MAC address

-
Round-Robin . All the interfaces are selected on a round-robin basis
0
 
LVL 42

Accepted Solution

by:
paulsolov earned 500 total points
ID: 35072641
forgot to pention.  The newer Ontap have port as well

I keep this handy

http://blog.scottlowe.org/2008/01/08/lacp-with-cisco-switches-and-netapp-vifs/
0
 
LVL 1

Author Comment

by:NAMEWITHELD12
ID: 35072676
thanks Paul !
0

Featured Post

Superior storage. Superior surveillance.

WD Purple drives are built for 24/7, always-on, high-definition security systems. With support for up to 8 hard drives and 32 cameras, WD Purple drives are optimized for surveillance.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Phishing is at the top of most security top 10 efforts you should be pursuing in 2016 and beyond. If you don't have phishing incorporated into your Security Awareness Program yet, now is the time. Phishers, and the scams they use, are only going to …
This article aims to explain the working of CircularLogArchiver. This tool was designed to solve the buildup of log file in cases where systems do not support circular logging or where circular logging is not enabled
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

895 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now