Solved

Cisco call Manager

Posted on 2011-03-08
4
330 Views
Last Modified: 2012-05-11
Dear all,
I have a user that is in a particular huntgroup which i want to remove and add him to a new huntgroup however could i have some advise on how to do this? a how to guide if you like on how to do this in call Manager
Many thanks all
0
Comment
Question by:PercivalM
  • 2
4 Comments
 
LVL 3

Expert Comment

by:shameer2000611
ID: 35087325
hunt group can be configured like line group,hunt group and hunt pilot.

so if you want to remove the user from a hunt group, you can select the line group which associated with the hunt group and you can remove the line from the specefic line group.

same way you can assocaite this line to other hunt group.

i think this will give you a vague idea, please let me know.
0
 

Author Comment

by:PercivalM
ID: 35187141
Hi Shameer,
Is there any documentation you know of such as a step by step guide?
Many thanks
Mark
0
 
LVL 4

Expert Comment

by:mihailpetreski
ID: 37217621
Please see the attached image.

Go to Line Groups and you will see the selected DNs that are configured to use that line group.
you can remove and add DNs through there.

remove the  DN you don't want in that line group, then go to the new line group and add the selected DN.
line-group.jpg
0
 
LVL 4

Accepted Solution

by:
mihailpetreski earned 500 total points
ID: 37217623
0

Featured Post

Live: Real-Time Solutions, Start Here

Receive instant 1:1 support from technology experts, using our real-time conversation and whiteboard interface. Your first 5 minutes are always free.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In my office we had 10 Cisco 7940G IP phones that were useless as they were showing PROTOCOL APPLICATION INVALID when started. I searched through Google and worked for a week continuously on those phones, and finally got them working. This is a di…
Skype is a P2P (Peer to Peer) instant messaging and VOIP (Voice over IP) service – as well as a whole lot more.
This is used to tweak the memory usage for your computer, it is used for servers more so than workstations but just be careful editing registry settings as it may cause irreversible results. I hold no responsibility for anything you do to the regist…
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…

813 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now