Solved

Cisco 2621 Config Change

Posted on 2011-03-09
1
578 Views
Last Modified: 2012-05-11
I need to change my cisco interface IP address

My ISP is changing the modem IP and I need to update the current interface 0/0 IP

What commands would I issue using Putty via telnet to change the current to these?

WAN ADDRESS : 184.187.11.210
WAN NETMASK : 255.255.255.224
WAN GATEWAY : 184.187.11.193
DNS : 68.105.28.16 / 68.105.29.16


Router>en
Router#
Router#sh star
Router#sh startup-config
Using 594 out of 29688 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname border
!
enable password XXXXXXX
!
ip subnet-zero
!
!
ip name-server 68.13.16.30
!
call rsvp-sync
!
!
!
!
!
!
!        
!
interface FastEthernet0/0
 ip address 70.165.106.243 255.255.255.224
 duplex auto
 speed auto
!
interface FastEthernet0/1
 ip address 70.167.227.129 255.255.255.240
 duplex auto
 speed auto
!
ip classless
ip route 0.0.0.0 0.0.0.0 70.165.106.225
no ip http server
!
!
dial-peer cor custom
!
!
!
!
line con 0
line aux 0
line vty 0 4
 password XXXXXXX
 login
!
end
0
Comment
Question by:FirstDirect
1 Comment
 
LVL 3

Accepted Solution

by:
mrmozaffari earned 500 total points
ID: 35089072
Enable
Configure Terminal
Interface Fa0/0
Ip address 184.187.11.210 255.255.255.224
exit
no ip route 0.0.0.0 0.0.0.0 70.165.106.225
ip route 0.0.0.0 0.0.0.0 184.187.11.193
ip name-server 68.105.28.16 68.105.29.16
0

Featured Post

Free Tool: Path Explorer

An intuitive utility to help find the CSS path to UI elements on a webpage. These paths are used frequently in a variety of front-end development and QA automation tasks.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question