Solved

Network a Telstra Pre-Paid Mobile Wi-Fi

Posted on 2011-03-09
3
612 Views
Last Modified: 2012-06-21
I have a Telstra Pre-Paid Mobile Wi-Fi modem (has built in wi-fi and supports 5 connections) and I am wanting to connect it to a local wi-fi network and then shair the internet connection.  I wish to do this so I can setup a local wi-fi network with more than 5 devices and still be able to connect to the internet using the telstra modem.
0
Comment
Question by:jcrust
  • 2
3 Comments
 
LVL 38

Expert Comment

by:Aaron Tomosky
ID: 35090769
A sumiltanious dual band router running ddwrt can connect to a wifi connection on 2.4 and rebroadcast on 5. The only other way I know how it to take one router or an access point like the dlink 2100ap that can run in bridge mode to turn the wifi wired, then a second router to create a new subnet and wifi you connect to.

You can also use a laptop instea of the first router.
You could also get a USB cellular modem and a router that can use it as it's wan connection.
0
 

Author Comment

by:jcrust
ID: 35124104
Thanks I will get a router and give it a go.  If anyone has some info on what one o use or help on config that would be great.
0
 
LVL 38

Accepted Solution

by:
Aaron Tomosky earned 500 total points
ID: 35124622
I've used the dlink Dir-825 successfully but I flashed it with ddwrt. Never tried with stock firmware. Buffalo also makes some simultaneous dual band stuff that comes with ddwrt already installed.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Using in-flight Wi-Fi when you travel? Business travelers beware! In-flight Wi-Fi networks could rip the door right off your digital privacy portal. That’s no joke either, as it might also provide a convenient entrance for bad threat actors.
DECT technology has become a popular standard for wireless voice communication. DECT devices are not likely to be affected by other electronic devices and signals because they operate in a separate frequency-band.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

831 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question