Solved

How to get the ringtones from CME???

Posted on 2011-03-09
2
888 Views
Last Modified: 2012-08-13
Hello Experts,
After our phone system crashed, we were able to load the IOS and the running config, but it seems that the ringtones that were stored in the flash are lost.

Does anybody know how can I get them?  The support account expired long time ago, so I can't call the TAC.

Also, the ringtones are the same for all the CME ?
For what I have read so far it seems so.

These are the ringtones I am looking for:

tftp-server flash:P0030702T023.loads
tftp-server flash:P0030702T023.sb2
tftp-server flash:P0030702T023.sbn
tftp-server flash:P0030702T023.bin
tftp-server flash:Analog1.raw
tftp-server flash:Analog2.raw
tftp-server flash:AreYouThere.raw
tftp-server flash:AreYouThereF.raw
tftp-server flash:Bass.raw
tftp-server flash:CallBack.raw
tftp-server flash:Chime.raw
tftp-server flash:Classic1.raw
tftp-server flash:Classic2.raw
tftp-server flash:Clockshop.raw
tftp-server flash:Drums1.raw
tftp-server flash:Drums2.raw
tftp-server flash:FilmScore.raw
tftp-server flash:HarpSynth.raw
tftp-server flash:Jamaica.raw
tftp-server flash:KotoEffect.raw
tftp-server flash:MusicBox.raw
tftp-server flash:Piano1.raw
tftp-server flash:Piano2.raw
tftp-server flash:Pop.raw
tftp-server flash:Pulse1.raw
tftp-server flash:Ring1.raw
tftp-server flash:Ring2.raw
tftp-server flash:Ring3.raw
tftp-server flash:Ring4.raw
tftp-server flash:Ring5.raw
tftp-server flash:Ring6.raw
tftp-server flash:Ring7.raw
tftp-server flash:Sax1.raw
tftp-server flash:Sax2.raw
tftp-server flash:Vibe.raw
tftp-server flash:Ringlist.xml
tftp-server flash:DistinctiveRinglist.xml
tftp-server flash:en_bacd_welcome.au


Thanks a lot!

0
Comment
Question by:anbant
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
2 Comments
 
LVL 1

Author Comment

by:anbant
ID: 35097739
I was reading the book CCNA voice

and I found out this:
"One is the Cisco IOS with voice services, and the other is
the CUCM Express software. The versions of these two software items must be compatible
with each other to avoid any operability issues. Cisco has a handy website that gives you a
very clear IOS compatibility matrix for the version of IOS/CUCM Express software you
wish to run. This matrix is frequently updated and can be found at http://www.cisco
.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm"

So does this means that the ringtones are part of the CME 4.1 software isn't?
0
 
LVL 1

Accepted Solution

by:
anbant earned 0 total points
ID: 35141231
Yes, I confirmed that the ringtones are part of CME 4.1 but I could find the same ringtones in CME 4.3.
The problem is solved.
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

How To Create Custom / Distinctive Ring Tones on Polycom Phones Purpose and Overview When creating a custom ring tone, you have simple aspirations: to make your phone cooler than everyone else's. Perhaps you need a louder ringer. Perhaps you w…
Although VoiceOver IP has been around for a while, internet connections have only recently become fast enough to provide good call quality. Now, VoIP has become a real option for businesses looking at ways to improve their business model. In this ar…

752 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question