Solved

Provide  new LUN for Vmware ESX

Posted on 2011-03-10
5
1,118 Views
Last Modified: 2012-05-11
Hi ,

I am management a enviroment Vmware ESX 3.0 with storage system DS 4700 with Fibre Channel. My question is about how provide new LUN for DATASTORE.

On Configuration >> Storage >> Add Storage  then I select Disk/LUN and NEXT, on Device Location not show me any information about my storage How  I can connect on storage ?

Thank very much.
0
Comment
Question by:aspenbr
5 Comments
 
LVL 4

Expert Comment

by:CHutchins
Comment Utility
you need to create the Lun and then present it to the ESX server on the device.
0
 
LVL 40

Expert Comment

by:coolsport00
Comment Utility
Create the LUN/storage, I assume on your SAN? Once created, present it to your ESX host on your SAN. After it's presented, first rescan your ESX HBAs on the Configuration -> Storage Adapters page; then you go into Configuration >> Storage >> Add Storage and yes, add Disk/LUN. You may not see it yet...sometimes take a couple or so HBA rescans.

~coolsport00
0
 
LVL 2

Accepted Solution

by:
dassey earned 500 total points
Comment Utility
0
 
LVL 1

Author Comment

by:aspenbr
Comment Utility
Thank very much Dasey

I get create disk virtual on Vmware but I think that I have done mistake because my storage alarm with message Logical Driver not on Proferred Path for a disk

What Caused the Problem?
There is a problem accessing the controller listed in the Recovery Guru Details Area. Any logical drives that have this controller assigned as their preferred path will be moved to the non-preferred path (alternate controller). This procedure will help you pinpoint the problem along the data path. Because the logical drives will be moved to the alternate controller, they should still be accessible. Therefore, no action is required on the individual logical drives.

Somebody have a idea for solve this problem way secure.

Thank very much.
0
 
LVL 1

Author Closing Comment

by:aspenbr
Comment Utility
The tip work very well . Thank very much
0

Featured Post

Control application downtime with dependency maps

Visualize the interdependencies between application components better with Applications Manager's automated application discovery and dependency mapping feature. Resolve performance issues faster by quickly isolating problematic components.

Join & Write a Comment

Suggested Solutions

In this step by step tutorial with screenshots, we will show you HOW TO: Enable SSH Remote Access on a VMware vSphere Hypervisor 6.5 (ESXi 6.5). This is important if you need to enable SSH remote access for additional troubleshooting of the ESXi hos…
In this article, I will show you HOW TO: Create your first Windows Virtual Machine on a VMware vSphere Hypervisor 6.5 (ESXi 6.5) Host Server, the Windows OS we will install is Windows Server 2016.
Teach the user how to configure vSphere clusters to support the VMware FT feature Open vSphere Web Client: Verify vSphere HA is enabled: Verify netowrking for vMotion and FT Logging is in place or create it: Turn On FT for a virtual machine: Verify …
This tutorial will walk an individual through the steps necessary to enable the VMware\Hyper-V licensed feature of Backup Exec 2012. In addition, how to add a VMware server and configure a backup job. The first step is to acquire the necessary licen…

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

9 Experts available now in Live!

Get 1:1 Help Now