Solved

Cisco IP accounting

Posted on 2011-03-11
7
1,364 Views
Last Modified: 2012-05-11
Hi,

I am using IP accounting on a Catalyst 3560 IOS 12.2(25r)SEC.
Strangely, not entire traffic is reported onto the Interfaces I am surpervising.
I have disable fast switching, I  have enabled IP accounting on a VLAN interface, this switch is performing BGP peering. I am trying to catch traffic from outside local LANs.

I have nearly only traffic with AD, SQL and DNS servers reported in IP accounting.
Terminal and SMB sessions do not.

Anybody any idea.
0
Comment
Question by:Clodo28
  • 4
  • 3
7 Comments
 
LVL 24

Expert Comment

by:rfc1180
ID: 35113252
can your post your config please?
0
 

Author Comment

by:Clodo28
ID: 35127001
This only the VLAN, I do the IP accounting on
interface Vlan200
 ip address 10.201.64.65 255.255.255.240
 ip accounting output-packets
 no ip route-cache cef
 no ip route-cache
 no ip mroute-cache
!
0
 
LVL 24

Expert Comment

by:rfc1180
ID: 35130739
Entire config please
0
PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

 

Author Comment

by:Clodo28
ID: 35136049
Sorry I cannot. It is company confidential.
0
 
LVL 24

Expert Comment

by:rfc1180
ID: 35144718
If it is any consolation, just remove the username, password, public IPs, SNMP password (any passwords for that matter); and it should not really be an issue. It would really help to see the entire config to continue to diagnose the issue.

Billy
0
 

Accepted Solution

by:
Clodo28 earned 0 total points
ID: 35261483
I found my way on this one : clear CEF table
0
 

Author Closing Comment

by:Clodo28
ID: 35312615
I found my way on my own
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

It happens many times that access list (ACL) have to be applied to outgoing router interface in order to limit some traffic.This article is about how to test ACL from the router which is not very intuitive for everyone. Below scenario shows simple s…
I have seen some questions on problems with SSH/telnet access to Cisco routers that may occur despite the fact that from a PC connected to your LAN, Internet connectivity is in place and users can access Internet sites without any issues.  There are…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

919 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

18 Experts available now in Live!

Get 1:1 Help Now