How to configure BNT L2/3 switch module to support 2 segments?

This is using IBM chassis E, with blades HS22 and HS12. I'm using BNT L2/3 6-port switch module. Now, few blades, blade 1 and blade 2 are DMZ servers, and the rest is office networks. What should I do in order for such a few segments? create vlan? how about external port assignment?
BalackAsked:
Who is Participating?
 
BalackConnect With a Mentor Author Commented:
Use web-based instead. Eventually, change the vlan memberships to respective INT and EXT ports solve the problem for the day.
0
 
gheistCommented:
You should partition the switch, it is not Cisco, and VLAN means tagging on a wire.
0
 
BalackAuthor Commented:
Which switch has to be partitioned? how?
0
Improve Your Query Performance Tuning

In this FREE six-day email course, you'll learn from Janis Griffin, Database Performance Evangelist. She'll teach 12 steps that you can use to optimize your queries as much as possible and see measurable results in your work. Get started today!

 
gheistCommented:
Last time I partitioned Bay Networks switch it needed the initialization via Serial port directly attached to the switch.
Probably blade rack does assign management address to a switch where you can connect with telnet and/or SSH
0
 
BalackAuthor Commented:
Management ip address can be assigned thru AMM. After telnetting to the switch, how should I "partition the switch?
0
 
BalackAuthor Commented:
Where can I find those cli commands for the above switch?
0
 
gheistCommented:
type 'help' command?
0
 
BalackAuthor Commented:
This is the proper way, and it works like charm.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.