Solved

How do I use CISCO VPN Client For Windows 7 64 Bit

Posted on 2011-03-13
8
874 Views
Last Modified: 2012-05-11
Hi.
  I installed CISCO VPN client on my Windows 7 64Bit machine. I am able to establish connection and also i am getting the IP address. But when I am trying to RDP any server or trying to ping its not connecting. As anybody had simillar issue ? What would be the cause. Please suggest the solution

Thanks
kris
0
Comment
Question by:Kris_Zawisza
  • 4
  • 3
8 Comments
 
LVL 20

Expert Comment

by:RPPreacher
ID: 35125810
Turn off Windows firewall on servers.
0
 
LVL 35

Expert Comment

by:Ernie Beek
ID: 35126747
Just to make sure: the VPN is working when you try it from another machine?
0
 

Author Comment

by:Kris_Zawisza
ID: 35126878
From My XP machine its working fine. But from this new Windows & 64 bit machine its not working.
I disable the firewall of the Windows 7 client machine but still no luck.
0
 
LVL 35

Expert Comment

by:Ernie Beek
ID: 35126893
Just another (obvious) question: you do have the 64bit version of the client?

If so:
When installing, did you do a 'run as administrator?
Did you have any other VPN clients installed?
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 

Author Comment

by:Kris_Zawisza
ID: 35126925
Yes I installed Cisco VPN Client for 64 Bit OS. I run by using my credential which is in adminstartor group. No Only i have CISCO vpn clinet. And as I told in my question that Its establish connection and I am getting the IP also.
0
 
LVL 35

Expert Comment

by:Ernie Beek
ID: 35127006
I read that. But there are some issues with the client and win7. Even when you are administrator you sometimes need to do run as administrator to install things well. With the cisco clients sometimes the virtual adapter doesn't get installed correctly if you don't. So yes, in win7 being an administrator doesn't you are an administrator :-~

Other things you might want to check:
Anything showing int the eventlogs?
When connected and trying to get through the VPN, does anything show in the logs of the firewall (PIX, ASA, another ?).
0
 

Accepted Solution

by:
Kris_Zawisza earned 0 total points
ID: 35238816
I have resolved the issue by installing Citrix DNEUpdate client for 64 bit OS.
After installing reboot the system and it works fine.
Thanks to all of you for your suggestion.
0
 

Author Closing Comment

by:Kris_Zawisza
ID: 35304447
I have resolved the issue.
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
iOS and VPN 6 142
SSL RA VPN 7 102
VMware ESXi 5.5 - Remote Latency via VPN 2 66
L2TP/IPSec VPN Passthrough Cisco ASA 5505 8.2(5) to Server 2008 R2 4 47
Preface Having the need * to contact many different companies with different infrastructures * do remote maintenance in their network required us to implement a more flexible routing solution. As RAS, PPTP, L2TP and VPN Client connections are no…
Sometimes, you want your microsoft VPN to route all the traffic to the remote network. Usually your employer network. This makes it possible to access all the nodes inside this remote LAN, even if they have no "public DNS" entries. To do so, you wo…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

948 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

18 Experts available now in Live!

Get 1:1 Help Now