Solved

Multicast on Single HP ProCurve 5406zl

Posted on 2011-03-14
2
2,105 Views
Last Modified: 2012-05-11
I have a single HP ProCurve 5412zl with several VLANs defined. I need multicast traffic sent out on VLAN 2 to be received on other VLANs.
There are NO other network devices involved (it is a standalone switch).
Do I need to configure multicast routing on the switch (I'm trying not to buy a premium license!), or is there something else I can do as it is all contained in a single switch?

many thanks
networknoob
0
Comment
Question by:networknoob
2 Comments
 
LVL 13

Accepted Solution

by:
kdearing earned 500 total points
ID: 35129053
I'm not sure about the HP switches but...

You'll either need multicast routing or implement MVR
0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 35130701
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Troubleshooting a networked MFP 9 97
Need hlpe troubleshooting a connection that drops, please see below. 3 33
BGP cluster ID 1 64
route-map permit with a number 1 19
A few months ago I attended the Rocky Mountain IPv6 Summit which was a two-day educational event; it was the 3rd annual conference held here in Denver, Colorado that was held at the Hyatt Regency Denver at the Colorado Convention Center. It was an e…
Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question