Solved

Test I/O on a specific Storage under linux

Posted on 2011-03-14
2
377 Views
Last Modified: 2012-06-21
Hello All,

i need To test a specific storage connected via fiber to our IBM server

i need to know the time that it take to read and / or write to that partition,

what is the exact commands to do so ?

Thanks in Advance.

Info

Disk /dev/sdc: 3294.0 GB, 3294091018240 bytes
255 heads, 63 sectors/track, 400483 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1               1      267350  2147483647+  ee  EFI GPT
0
Comment
Question by:-Rayv-
2 Comments
 
LVL 12

Accepted Solution

by:
mccracky earned 500 total points
ID: 35130609
0
 

Author Comment

by:-Rayv-
ID: 35149015
Iozone was great

Thank you
0

Featured Post

The Eight Noble Truths of Backup and Recovery

How can IT departments tackle the challenges of a Big Data world? This white paper provides a roadmap to success and helps companies ensure that all their data is safe and secure, no matter if it resides on-premise with physical or virtual machines or in the cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Lets start to have a small explanation what is VAAI(vStorage API for Array Integration ) and what are the benefits using it. VAAI is an API framework in VMware that enable some Storage tasks. It first presented in ESXi 4.1, but only after 5.x sup…
Each year, investment in cloud platforms grows more than 20% (https://www.immun.io/hubfs/Immunio_2016/Content/Marketing/Cloud-Security-Report-2016.pdf?submissionGuid=a8d80a00-6fee-4b85-81db-a4e28f681762) as an increasing number of companies begin to…
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

730 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question