?
Solved

How do you specify which lan connection probrams use in Win 7

Posted on 2011-03-14
4
Medium Priority
?
556 Views
Last Modified: 2013-11-09
I connect to a Company VPN to get email and to connect to Remedy software. The VPN is terribly slow with download speed of 1 meg or less. If I diconnect from the VPN I get 20+ Meg download speeds. I have 2 ethernet ports on my computer. How do I direct some of the traffic to the VPN and all other traffic  to the open road for the faster speeds?
0
Comment
Question by:Steve_Lockhart
  • 2
  • 2
4 Comments
 
LVL 13

Expert Comment

by:kdearing
ID: 35132384
The VPN will need to be re-configured for split-tunnelling.
0
 

Author Comment

by:Steve_Lockhart
ID: 35133633
I don't have control of the VPN. I'm a user with a desktop machine with 2 lan ports on the back. I need to use the VPN for mail and to access Remedy (software on work lan). I'd like to get to the internet without going thru the VPN. When I go thru the VPN I get  less than 1 Mbps download speeds. When I disconnect I  get 22+ Mbps. Is there a way to do that
0
 
LVL 13

Accepted Solution

by:
kdearing earned 1500 total points
ID: 35133682
A VPN creates a secure tunnel to the other end.
By default all traffic must go through the tunnel (doesn't matter how many ethernet ports you have).

There are only 2 ways to access anything outside the VPN tunnel:
1. disconnect the tunnel
2. configure the VPN for split-tunnelling; this allows traffic not destined for the other end to use your existing internet connection.

You'll have to talk to your network administrator about your VPN.

Note that most network administrators won't allow split-tunnelling because this can create a 'back door' into their network through your internet connection,
0
 

Author Closing Comment

by:Steve_Lockhart
ID: 35134577
May be accurate but not the solution I was looking for
0

Featured Post

Keep up with what's happening at Experts Exchange!

Sign up to receive Decoded, a new monthly digest with product updates, feature release info, continuing education opportunities, and more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Hello All, I have been training on Multicast for a while now and whenever I start the topic , I find out that my friends /  Colleagues mention that they do not know how to test Multicast Joins. As most of the multicast would be video traffic and …
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question