?
Solved

VPN (PPTP) not working

Posted on 2011-03-14
3
Medium Priority
?
867 Views
Last Modified: 2012-05-11
Hi experts,

Any reason why my vpn wouldn't be working on a Billion BiPAC 7404VNOX router? Used to work before but no longer after updating firmware.

Config screen shot is below. Firewall is disabled. Any help would be appreciated.

billion config
Cheers
Michael
0
Comment
Question by:mstrelan
  • 2
3 Comments
 
LVL 11

Expert Comment

by:DIPRAJ
ID: 35135401
first do one thing ...
check your authentication type--
try with--
1. PAP
2. CHAP
3.MSCHAP V 2

i have seen you have used chap (auto)
0
 
LVL 10

Accepted Solution

by:
mstrelan earned 0 total points
ID: 35186131
Reverting the firmware fixed it, so no way am I going to bother mucking around with settings anymore. Thanks anyway.
0
 
LVL 10

Author Closing Comment

by:mstrelan
ID: 35221357
firmware problem
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

One of the Top 10  common Cisco VPN problems are not-matching shared keys. This is an easy one to fix, but not always easy to notice, see the case below. A simple IPsec tunnel between fast Ethernet interfaces of routers SW1 (f1/1) and R1(f0/0). …
If you’re involved with your company’s wide area network (WAN), you’ve probably heard about SD-WANs. They’re the “boy wonder” of networking, ostensibly allowing companies to replace expensive MPLS lines with low-cost Internet access. But, are they …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…
Suggested Courses

862 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question