Solved

Optimal Height for Cisco Aironet 1142N

Posted on 2011-03-15
2
1,093 Views
Last Modified: 2012-06-27
We are deploying several Cisco Aironet 1142N WAP in lightweight mode with standard internal antenna in a large open air warehouse.  The ceiling is 24' high.  I suspect that is too high to get maximum connectivity.

Does anyone know the optimal height for placement of the WAPs?
0
Comment
Question by:RPPreacher
2 Comments
 
LVL 12

Accepted Solution

by:
DarinTCH earned 500 total points
ID: 35138278
20-25' is a good height
omnidirectional antennas work great
un;ess you using directional or Yagi then you should get even signal coverage

see article

http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.html

0
 
LVL 20

Author Closing Comment

by:RPPreacher
ID: 35138434
Perfect.
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cisco 5508 WLC software upgrade 2 71
Boosting Power of a Cisco Access Point 8 60
ip igmp join-group 8 39
Do stacking modules come with the Cisco WS-C3650-48PS-S switches 2 32
Short answer to this question: there is no effective WiFi manager in iOS devices as seen in Windows WiFi or Macbook OSx WiFi management, but this article will try and provide some amicable solutions to better suite your needs.
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question