Solved

Mouse cursor freezes when I move mouse too fast.

Posted on 2011-03-15
11
3,187 Views
Last Modified: 2012-05-11
I have latest drivers installed and for the mouse and motherboard and also for usb, my motherboard supports high speed usb. But I dont know whats the problem. Here how I know that this is the problem, when mouse is on ps2 and moue rate is 100 if I move rapidly fast mouse it goes crazy but when I reduce it it's almost ok freezing is less happening. I am using mx500, motherboard asus a7v333-x, 1GB ram ddr1, Ati Radeon hd 3450 512 MB agp(latest drivers), but I dont know what are the latest drivers for the usb here is what I have:
Usb root hub, diver version:5.1.2600.5512
Via usb enhanced host controler, driver version:5.1.2600.0, driver date:1.6.2002

Here is the list of things that arent solving the problem:
The computer is very busy & the system resources are very low. (It's not)
Start>Settings>Control Panel>System>Performance>Graphics
Do this:
Move the Hardware Acceleration Slider one or two clicks to the left. (Tried, not working)
Don't have any IRQ conflicts, I checked.
Your system is overheating.(Tempretare's are ok)
You have bad memory. (Memory is good)
Reinstalling the dirvers for mouse want do the trick already tried.
I have even installed xp god know how many times.
Tried to rise a dpi but that is the main problem.
I dont have any virus or malware system is clean.
Voltage on usb is 4,75V.
When I plug in a genius net scroll mouse it work perfectly even on the same usb that mx500 froze it. I even tried pluging out the network card but still nothing.

Here is another idea this is also happening a lot when I play cod2, my mouse just freezes after 2 min of playing the game. I have searched the whole internet with no solution.
Windows XP Sp3 installed original.
Any solution?
0
Comment
Question by:vsindelic
  • 8
  • 3
11 Comments
 

Author Comment

by:vsindelic
Comment Utility
When I play cod2 with mouse on ps2 this is rarely happening.
0
 
LVL 16

Assisted Solution

by:sjklein42
sjklein42 earned 250 total points
Comment Utility
Check your System Event Log for mouse buffer overflow errors

You sometimes may get an error message telling you that you have an overflow in your mouse buffer or keyboard buffer. When that happens, it means the buffer isn't large enough and you need to increase its size. To increase your mouse buffer, run the Registry Editor, go to

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Mouclass\Parameters

and find the

MouseDataQueueSize

 subkey. The default setting is 100 (64 hex). Increase the decimal number to increase the size of the buffer; then exit the Registry and reboot. You may need to try several different settings until you find the right one.


http://www.freeopenbook.com/win-xp-hacks/chp-7-sect-3.html
0
 

Author Comment

by:vsindelic
Comment Utility
That actualy helped for two hole days after that it was the same. I have a high speed usb port on the backpanel but the thing is I tried the both of usb ports but still nothing.
0
 
LVL 16

Expert Comment

by:sjklein42
Comment Utility
Are there any mouse buffer overflow messages in the System Event Log?

Something else to try:

See if it helps to change to the USB polling rate:
 
Click "Start" and type "Regedit" in the "Run" field. Hit "Return" to open the Registry Editor tool.

Navigate to the following registry key:

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\{36FC9E60-C465-11CF-8056-444553540000}\0000]

Right-click the key and select "Create" and "DWORD" from the list of options.

Right-click on the new key and select "Rename." Type "IdleEnable" and click "OK."

Right-click the "IdleEnable" key and in the "Value" field type "1" to increase the polling interval.

Reboot the Windows computer to save these settings.

http://www.ehow.com/how_7587224_increase-usb-polling-rate.html#ixzz1GsAytWaD

0
 

Author Comment

by:vsindelic
Comment Utility
Noup even that wont work, here something that I've discovered, when cursor freezes, I have a program that's called hidusbf and it's used for increasing mouse rate but it has to restart the usb service and even if I don't increase the mouse rate just simple restart that service cursor works but it's still the same thing even after that it just freezes in cod2.
0
Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

 

Author Comment

by:vsindelic
Comment Utility
Oh yea I forgot to mention that nothin is loged in System Event log, I don know how.
0
 
LVL 16

Expert Comment

by:sjklein42
Comment Utility
Must be something about the particular mouse.  What's the make and model of the mouse?
0
 

Author Comment

by:vsindelic
Comment Utility
Logitech mx 500, but the rest information on the back of the mouse can't be seen because over time it disappeared.
0
 

Author Comment

by:vsindelic
Comment Utility
I think that problem is maybe in punk buster service I noticed in the event log the times when it started and sent stop signal that that's the time where my mouse stop working. Do you happened to know how to solve this? But the thing is that punk buster service is restarting by it self what does it have to do with my mouse?
0
 

Accepted Solution

by:
vsindelic earned 0 total points
Comment Utility
I actualy fixed the mouse it was problem in the cable. I found out that by inspecting the mouse thoroughly. Thank you for you solutions but it seems that the problem was somethnig else.
0
 

Author Closing Comment

by:vsindelic
Comment Utility
It was problem in the cable not software. But I want to thank sjklein42 he tried to help and I appreciate his assistance.
0

Featured Post

How to run any project with ease

Manage projects of all sizes how you want. Great for personal to-do lists, project milestones, team priorities and launch plans.
- Combine task lists, docs, spreadsheets, and chat in one
- View and edit from mobile/offline
- Cut down on emails

Join & Write a Comment

In the modern office, employees tend to move around the workplace a lot more freely. Conferences, collaborative groups, flexible seating and working from home require a new level of mobility. Technology has not only changed the behavior and the expe…
This paper addresses the security of Sennheiser DECT Contact Center and Office (CC&O) headsets. It describes the DECT security chain comprised of “Pairing”, “Per Call Authentication” and “Encryption”, which are all part of the standard DECT protocol.
It is a freely distributed piece of software for such tasks as photo retouching, image composition and image authoring. It works on many operating systems, in many languages.
This video shows how to remove a single email address from the Outlook 2010 Auto Suggestion memory. NOTE: For Outlook 2016 and 2013 perform the exact same steps. Open a new email: Click the New email button in Outlook. Start typing the address: …

763 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now