?
Solved

windows vpn clinet cannot connect using CradlePoint MBR1200

Posted on 2011-03-15
4
Medium Priority
?
2,773 Views
Last Modified: 2012-05-11
Okay, so maybe it;s me but I cannot seem to figure this one out and need anyones help. I have setup a CradlePoint MBR1200 with a Sprint 4G card for a public Wi-Fi spot for users. This was setup because in the area the location is in can only get slow DSL connections.

I used a CradlePoint MBR1200 with pretty much all default settings but now, any laptop trying to connect using the Windows VPN client to connect to MY internal servers (we have some internal users on laptops who visit the site) seem to fail.

I cannot seem to see any issues as to what may be blocking the settings. Does the VPN client use a specific port on the outbound which I may somehow be blocking using the default settings?

Any help would greatly be appreciated.
0
Comment
Question by:yoojie
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 1

Accepted Solution

by:
gordhunt earned 2000 total points
ID: 35341545
On the router under Advanced  / Firewall uncheck PPTP underneath the Application Level Gateway Configuration section and save changes.   This will allow VPN traffic to passthrough.

Gord
0
 

Author Comment

by:yoojie
ID: 35401598
GordHunt - I checked it and all is working. It was unchecked by default. I am assuming that when unchecked PPTP traffic cannot pass and checked it can.
0
 

Author Closing Comment

by:yoojie
ID: 35401611
Router has PPTP unchecked - looks like it needs to be checked in order for traffic to pass correctly.
0
 
LVL 1

Expert Comment

by:gordhunt
ID: 35403892
Yes that's correct glad you got it working
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Tired of waiting for your show or movie to load?  Are buffering issues a constant problem with your internet connection?  Check this article out to see if these simple adjustments are the solution for you.
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question