Solved

CISCO  NEW COMPACT FLASH CARD

Posted on 2011-03-16
4
522 Views
Last Modified: 2012-05-11
I have an 1841 Router and need to upgrade to a NEW IOS | Due to size limitations on the existing 32mb CF card, I Cannot.

I have a new 128mb CF card |

How can I get it formatted and get the Existing IOS (or new IOS) and config onto the new CF Card.
0
Comment
Question by:yostnet
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 17

Expert Comment

by:Kvistofta
ID: 35150878
Put the CF-card into your computer with a CF card-reader and configure it as FAT32 and it will work. You can also put your old card in your computer and copy the existing files to harddisk before copiing them back to the new card.

/Kvistofta
0
 

Author Comment

by:yostnet
ID: 35150888
I am not sure I understand about copying files from the PC to the card
0
 
LVL 17

Accepted Solution

by:
Kvistofta earned 500 total points
ID: 35151255
If you have a pc With a CF reader you can put the old Card into it and it Will show up as à new harddrive in Windows.

What part dont you understand?

/Kvistofta
0
 

Author Comment

by:yostnet
ID: 35153697
I see | other than the IOS bin file, is there anything else that I need?

Seems that the router stores the configuration outside of the CF, NVRAM I suppose.

thanks
0

Featured Post

Create the perfect environment for any meeting

You might have a modern environment with all sorts of high-tech equipment, but what makes it worthwhile is how you seamlessly bring together the presentation with audio, video and lighting. The ATEN Control System provides integrated control and system automation.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses
Course of the Month5 days, 13 hours left to enroll

626 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question