[Webinar] Streamline your web hosting managementRegister Today

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 727
  • Last Modified:

Updating HP LeftHand from 8.5 to 9.0

Anyone have any experience on upgrading HP Left Hand firmware from 8.5 to 9.0? Tips, tricks, advice? Thanks!
0
MISOperations
Asked:
MISOperations
  • 2
  • 2
1 Solution
 
Glen KnightCommented:
The only thing you will need to do if you haven't already is upgrade the version of the Storage Console you have before you can upgrade the Lefthand units.

You need to be running Central Management Console version 9.0, apart from that, the obvious of course is to make sure you have a backup, but this isn't as much of an issue if you are using the LeftHand Units in high redundancy mode (2 units mirrored)
0
 
MISOperationsAuthor Commented:
I have the CMC updated to 9.0 and have downloaded the updates.
0
 
Glen KnightCommented:
Then you should be good to go, I did 4 units only last week and didn't have a problem.
0
 
MISOperationsAuthor Commented:
Did you lose connectivity within any of his Iscsi connections or VMware machines during the upgrade?
0

Featured Post

Evaluating UTMs? Here's what you need to know!

Evaluating a UTM appliance and vendor can prove to be an overwhelming exercise.  How can you make sure that you're getting the security that your organization needs without breaking the bank? Check out our UTM Buyer's Guide for more information on what you should be looking for!

  • 2
  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now