?
Solved

HP3065 and HPZR30w will not display together

Posted on 2011-03-17
6
Medium Priority
?
611 Views
Last Modified: 2013-11-08
I'm running a HP Z800 with 24 gigs of ram, 2X3.33 cpus, 4 HP 30 inch monitors with Windows 7.
My video cards are HP nvidia FX4800.
3 of my monitors are HPZR30w and one is a HP3065.
The HPZR30ws are using display port and the 3065 is using DVI.
The 3065 will not display with the 3 HPZR30ws plugged into the video cards.
It's not the cables or video cards, they have all been replaced.
My power is good the power supply has been replaced.
I'm using battery backups so I know I don't have a ac power problem.
Anyone have any ideas why this is not working?
I really need your help on this.
0
Comment
Question by:GeoCFI
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 4
  • 2
6 Comments
 
LVL 25

Expert Comment

by:RobMobility
ID: 35179419
Hi,

Are you plugging the 3065 in using the DP to DVI adapter on one of the cards or the DVI port?

Regards.


RobMobility.
0
 
LVL 25

Expert Comment

by:RobMobility
ID: 35188666
Hi,

If you are using DisplayPort to DVI, are you using an active DP to Dual-Link adapter?

If using DVI, is the cable a dual-link cable?

Regards,


RobMobility.
0
 

Author Comment

by:GeoCFI
ID: 35190937
The cable is dual-link and I'm using an active usb powered adapter.
The 3065 is now working since I started using the powered adapter, but some of the z30s still blink intermittantly. (flash black for an instant, about 1/100 of a second) then back to normal.
0
What does it mean to be "Always On"?

Is your cloud always on? With an Always On cloud you won't have to worry about downtime for maintenance or software application code updates, ensuring that your bottom line isn't affected.

 
LVL 25

Expert Comment

by:RobMobility
ID: 35191033
0
 
LVL 25

Accepted Solution

by:
RobMobility earned 2000 total points
ID: 35191081
Hi,

Seems the blinking problem is an issue with that monitor:

http://h30434.www3.hp.com/t5/Desktop-Monitors-and-video/ZR30W-blinks/td-p/466621

Regards,


RobMobility.
0
 

Author Closing Comment

by:GeoCFI
ID: 35219028
HP is sending me a new computer.
In the meantime, don't buy HP, you will be happier with Dell.
HP has been jacking me around for 6 months on this.
Their hardware reps can't even change a system board.
And they don't even know Windows 7.
0

Featured Post

On Demand Webinar: Networking for the Cloud Era

Ready to improve network connectivity? Watch this webinar to learn how SD-WANs and a one-click instant connect tool can boost provisions, deployment, and management of your cloud connection.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Introduction: When experiencing some peculiar problem with the functioning of your PC, how many times has it happened that you look for a solution and even google can’t help? It could be that you are one of the only few people on earth who ma…
This article will show how Aten was able to supply easy management and control for Artear's video walls and wide range display configurations of their newsroom.
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

771 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question