Solved

MS Exchange 2010 Install fail...

Posted on 2011-03-18
2
342 Views
Last Modified: 2012-08-13
Hi:

We are trying to install MS Exchange 2010 in a new server. But when the setup run a discovery in the network it detect an old installation of MS Exchange 2000 that apparently was migrated to the current MS Exchange 2003 installation.  Our MS Ex 2000 server crash a few years ago, the consultant rescued the settings and pass it to a new MS Exch 2000 server. Then we create a new server with MS Exch 2003, but in the exchange manager console appears the new and the Old server.  The old server doesn't have any mailbox. This work was made by a different consultant.  The question here is: How can we remove any instance of the MS Exch 2000 from the MS Exch 2003 server without corrupting the 2003 installation?

Thanks,
Feferefe
0
Comment
Question by:feferefe
  • 2
2 Comments
 
LVL 7

Expert Comment

by:thakurdinesh
ID: 35168666
use the ADSI edit to remove the Exchange 2000 server and then prepare the schema and domain once again before you start to install in coexistance environment.
0
 
LVL 7

Accepted Solution

by:
thakurdinesh earned 500 total points
ID: 35168690
Once the old exchange 2000 servers are removed from the AD usin ADSI edit, you will be good to go. I have been in this situation and this solution worked for me. You might have to prepare AD using Exchange 2003 disk as well.
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
I had an issue with InstallShield not being able to use Computer Browser service on Windows Server 2012. Here is the solution I found.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

790 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question