Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

how do I setup a vpn remote network using cable service with 2 xp pro sp3 o.s. computers in separate locations

Posted on 2011-03-19
3
264 Views
Last Modified: 2012-05-11
I have a client who has two different stores and he would like to be able access the computers in each store from both locations. He uses Compass Max 2005d2.5 and v 9.1c progress dry cleaning software.I have never done kind of networking so am very ignortant of the process need simle step by step instructions.
0
Comment
Question by:Rcorn8559
  • 2
3 Comments
 
LVL 69

Accepted Solution

by:
Qlemo earned 500 total points
ID: 35171742
For a carefree setup you would need two VPN-capable Internet routers of the same brand. SOHO class is sufficient; there are many out there - so it is mostly a question of preference and availablity in local stores. Most of them have good VPN setup wizards leading you thru the creation process for a simple setup.
However, creating a VPN connection between two branches is nothing you can do in minutes, in particular if you do not have any network knowledge. I advice to pay somebody for setting all up, including to choose appropriate routers for that business. That person can show you how it works, and you can be certain that it works.
0
 
LVL 69

Expert Comment

by:Qlemo
ID: 35399130
This question has been classified as abandoned and is being closed as part of the Cleanup Program. See my comment at the end of the question for more details.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cisco ASA LDAP Authentication for VPN and Management 8 39
Juniper VPN for Mac and windows OS 5 50
Configuring VPN in server 2012 5 21
Review of a VPN cert policy 4 43
Secure VPN Connection terminated locally by the Client.  Reason 442: Failed to enable Virtual Adapter. If you receive this error on Windows 8 or Windows 8.1 while trying to connect with the Cisco VPN Client then the solution is a simple registry f…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question