?
Solved

Nvidia nForce4 Raid Controller question

Posted on 2011-03-19
1
Medium Priority
?
513 Views
Last Modified: 2012-05-11
I am trying to add a second disk array on an Engineering workstation that has an onboard Nvidia nForce4 raid controller.  Array 0 is 2 drives mirrored and I want to add a second array and mirror 2 more drives.  When i boot up the 2 new drives are posting but when i go into the raid utility the "new array" option is grayed out.  Any ideas?
0
Comment
Question by:mcrouch1
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 

Accepted Solution

by:
mcrouch1 earned 0 total points
ID: 35173065
Ok I got past the original issue.  I went into the bios and enabled the SATA ports under the Raid config.  I created the 2nd array and made it my boot partition.  I am about to install Windows 7 on the array but am deathly afraid I am going to screw up the original partition.  If i power the unit down and unplug the SATA drives that contain data will that affect the RAID?
0

Featured Post

On Demand Webinar - Networking for the Cloud Era

This webinar discusses:
-Common barriers companies experience when moving to the cloud
-How SD-WAN changes the way we look at networks
-Best practices customers should employ moving forward with cloud migration
-What happens behind the scenes of SteelConnect’s one-click button

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This is a fine trick which I've found useful many times, when you just don't want to accidentally run a batch script or the commands needs administrator rights.
In the absence of a fully-fledged GPO Management product like AGPM, the script in this article will provide you with a simple way to watch the domain (or a select OU) for GPOs changes and automatically take backups when policies are added, removed o…
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…
Monitoring a network: how to monitor network services and why? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the philosophy behind service monitoring and why a handshake validation is critical in network monitoring. Software utilized …

752 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question