Still celebrating National IT Professionals Day with 3 months of free Premium Membership. Use Code ITDAY17

x
?
Solved

Disable firewall in windows 2008

Posted on 2011-03-21
5
Medium Priority
?
519 Views
Last Modified: 2012-05-11
From my windows 2008 server I cannot telnet a particular port on remote system. This port I am able to telnet from other machines.

Please let me know how can I disable firewall in windows 2008 server or allow access to this particular port.

Thank you
0
Comment
Question by:ank5
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
5 Comments
 
LVL 74

Expert Comment

by:Glen Knight
ID: 35183370
In the Server Manager on the summary screen cluck the firewall settings option.

Alternatively it's in Control Panel.  You can disable it completely or add exceptions.

The problem could also be 3rd party security products.
0
 
LVL 1

Author Comment

by:ank5
ID: 35187507
Thanks for your reply.

Apparently the firewall is off. Please refer to the attached screenshot.

What else could be there on this 2008 server which is not allowing me to access the port on another machine?


Firewall.JPG
0
 
LVL 74

Expert Comment

by:Glen Knight
ID: 35187539
On another server? The local firewall will not prevent you from accessing resources on remote servers, the firewall on that remote server might.
0
 
LVL 1

Author Comment

by:ank5
ID: 35187801
Then what could be the problem?
Let me explain the problem in detail.
I have a Windows 2008 server and I have a Solaris server. From 2008 server when I try to telnet a port on the Solaris server, it fails. But same port (on Solaris) I am able to telnet from a Windows XP machine. All machines are in the same network.
So where could the problem be. Could the Solaris server be selectively allowing/disallowing calls.
0
 
LVL 74

Accepted Solution

by:
Glen Knight earned 2000 total points
ID: 35187824
it could be only allowing from certain IP's, if you have a machine that is working then change the Windows 2008 server IP to the same as that machine and check if it works.

What error are you getting from the 2008 server when you try to telnet?
0

Featured Post

Industry Leaders: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I was supporting a handful of Windows 2008 (non-R2) 2 node clusters with shared quorum disks. Some had SQL 2008 installed and some were just a vendor application that we supported. For the purposes of this article it doesn’t really matter which so w…
A safe way to clean winsxs folder from your windows server 2008 R2 editions
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
This tutorial will walk an individual through the steps necessary to install and configure the Windows Server Backup Utility. Directly connect an external storage device such as a USB drive, or CD\DVD burner: If the device is a USB drive, ensure i…

662 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question