Solved

Harden Firewall

Posted on 2011-03-22
1
500 Views
Last Modified: 2012-05-11
I have a Linksys RVO16 firewall, and need to lock down the SMTP.  I only want SMTP traffic to come in from the outside from a couple of IP ranges.  Can someone please tell me how to do this?  
0
Comment
Question by:PC4N6
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 57

Accepted Solution

by:
giltjr earned 500 total points
ID: 35195327
The manual is a bit hard to read,

 But it looks like you need to go to the Access Rule page and setup an access rule.

You want to allow traffic inbound from the WAN (source interface) and then specify what IP address you want to allow SMTP traffic inbound from.

It looks like you will need to define a unique Access Rule for each range you want to allow inbound e-mail from.

0

Featured Post

Free NetCrunch network monitor licenses!

Only on Experts-Exchange: Sign-up for a free-trial and we'll send you your permanent license!

Here is what you get: 30 Nodes | Unlimited Sensors | No Time Restrictions | Absolutely FREE!

Act now. This offer ends July 14, 2017.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
A 2007 NCSA Cyber Security survey revealed that a mere 4% of the population has a full understanding of firewalls. As business owner, you should be part of that 4% that has a full understanding.
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

691 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question