Solved

Fax to File RICOH MP C3501

Posted on 2011-03-22
1
2,593 Views
Last Modified: 2012-06-27
Hi our office just purchased a RICOH Aficio MP C3501 and we need to set it up so when we receive faxes it goes to a designated folder on our server instead of printing out the faxes. Does anybody know how to set this up? Any information would be extremely helpful. Thanks
0
Comment
Question by:TechGuy_007
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 11

Accepted Solution

by:
epichero22 earned 500 total points
ID: 35193420
I don't know about that printer off the top of my head, but I would imagine the first step would be to give the printer an IP address and subnet mask that's on the same network as the server.  Once that's set, create a shared folder on the server.  Then go into your Ricoh's setup screen and specify that you want faxes to save to that computer in that shared folder.


Shouldn't be much more than that.  The setup screen on the printer should walk you through it.
0

Featured Post

Comparison of Amazon Drive, Google Drive, OneDrive

What is Best for Backup: Amazon Drive, Google Drive or MS OneDrive? In this free whitepaper we look at their performance, pricing, and platform availability to help you decide which cloud drive is right for your situation. Download and read the results of our testing for free!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

While rebooting windows server 2003 server , it's showing "active directory rebuilding indices please wait" at startup. It took a little while for this process to complete and once we logged on not all the services were started so another reboot is …
I had an issue with InstallShield not being able to use Computer Browser service on Windows Server 2012. Here is the solution I found.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Monitoring a network: how to monitor network services and why? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the philosophy behind service monitoring and why a handshake validation is critical in network monitoring. Software utilized …

690 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question