Solved

Exchange Server 2010 Implementation

Posted on 2011-03-23
2
455 Views
Last Modified: 2012-08-13
• What is the correct setting for the correct settings for my dns to publish my Exchange 2010 server sp1.

• I can install on my server the three roles Edge EDGE TRANSPORT SERVER + FPE + TMG + ADAM. Without any complications, and what the settings step by step to carry out the publication of the Exchange service using this integration.

• Which are the ports to publish servers and other Exchange EDGE for the publication of the various services.

Note: I will thank you every answer to my questions in detail and make clear
0
Comment
Question by:Conectado
2 Comments
 
LVL 14

Accepted Solution

by:
Schnell Solutions earned 500 total points
ID: 35204515

In your DNS servers you need to configure your (MX) records with (A) records references to the IP addresses that will receive your email messages. It is recommendable that you use SPF records also in order to inentify which ones are the IP address that can send emails from your organization.
http://technet.microsoft.com/en-us/library/ff714972.aspx


You can install in the same server: Exchange EDGE Role, ForeFront Protection for Exchange, and ADAM. The forefront TMG shall be in a different server. In order to publish your EDGE server you can use a packet filter firewall or you can use ForeFront TMG also, you just need to follow the wizard publication for Exchange in TMG and specify that you want to publish Exchange SMTP server. (Even when you can install all the roles toguether just in one server, it is not recommendable to convine TMG with EDGE). Here the instructions for publishing the exchange services:
http://blogs.technet.com/b/exchange/archive/2009/12/17/3409102.aspx (Procedure for ISA 2006, is the same)
http://social.technet.microsoft.com/Forums/en-US/ForefrontedgePub/thread/75fc789d-eeeb-4cab-9f31-6ed3c88570c3


EDGE servers just need income TCP 25 in order to receive email from the Internet. From the EDGE to your HubTransport servers you need port 25 also in order to route the emails to your internal server. EDGE servers need the outbout TCP 25 in order to deliver email to the internet and UDP 53 for resolving DNS names (if you don't have a DNS in your DMZ). From your HUB Transport servers to the EDGE you need TCP 25 in order to relay your emails throw the SMARTHOST = EDGE and in case that you use EDGE SYNC you need additionally port TCP 50636


0
 

Author Closing Comment

by:Conectado
ID: 35208430
Gracias!!
0

Featured Post

Top 6 Sources for Identifying Threat Actor TTPs

Understanding your enemy is essential. These six sources will help you identify the most popular threat actor tactics, techniques, and procedures (TTPs).

Join & Write a Comment

This article explains how a domain name may be inadvertently appended to all DNS queries. This exhibits as described below. (CODE)And / Or: (CODE) Cause This issue can occur in either of these two scenarios. EITHER 1. A Primary DNS S…
ISA Server detected routes through the network adapter LAN that do not correlate with the network to which this network adapter belongs What does this mean and how can one go about correcting it? In simple terms, this error message indicates t…
Sending a Secure fax is easy with eFax Corporate (http://www.enterprise.efax.com). First, Just open a new email message.  In the To field, type your recipient's fax number @efaxsend.com. You can even send a secure international fax — just include t…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

708 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now