Solved

finding and changing fsmoroleowner attribute

Posted on 2011-03-24
5
1,181 Views
Last Modified: 2012-05-11
Hello,
 for SCOM 2007 R2 AD management pack I have to change fsmoroleowner attribute,
(It seems a very old dc is there now)
with the below command I see the wron dc
ldifde -f Infra_DomainDNSZones.ldf -d "CN=Infrastructure,DC=DomainDnsZones,DC=contoso,DC=com" -l fSMORoleOwner

but with every other method I see the correct DC.
Can you guide me to change this attribute from adsi edit or ntdsutil as I can't find it.
Thank you
0
Comment
Question by:TAI-
  • 3
5 Comments
 
LVL 63

Expert Comment

by:SysExpert
ID: 35211528
I would first run dcdiag verbose, on a few DC's to confirm who has the role and to make sure that everything is synced properly.

DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log
netdiag.exe /v > c:\netdiag.log (On each dc)

you should not get conflicting info on FMSO

I hope this helps !

0
 

Author Comment

by:TAI-
ID: 35212928
Hello sysexpert,
this is not a fsmo role problem,
it is a wrong attribute which let the scripts get error  problem :)
Kind a known problem for scom but I'm having problem finding the attribute
thank you
0
 
LVL 15

Expert Comment

by:wwwally
ID: 35355142
I think your looking for this complete tuning guide for the AD MP by Cameron fuller
http://systemcentercentral.com/BlogDetails/tabid/143/indexId/36600/Default.aspx
Regards,
Walter
0
 

Accepted Solution

by:
TAI- earned 0 total points
ID: 35364135
the solution is,
in adsiedit connect to dc=domaindnszones,dc=domain,dc=com (write manually in connection point section)
same for forestdnszones.
the check the attribute
thank you
0
 

Author Closing Comment

by:TAI-
ID: 35399321
This is where this attribute is
0

Featured Post

Does Powershell have you tied up in knots?

Managing Active Directory does not always have to be complicated.  If you are spending more time trying instead of doing, then it's time to look at something else. For nearly 20 years, AD admins around the world have used one tool for day-to-day AD management: Hyena. Discover why

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Find out how to use Active Directory data for email signature management in Microsoft Exchange and Office 365.
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
This tutorial will walk an individual through the steps necessary to install and configure the Windows Server Backup Utility. Directly connect an external storage device such as a USB drive, or CD\DVD burner: If the device is a USB drive, ensure i…
This tutorial will show how to configure a new Backup Exec 2012 server and move an existing database to that server with the use of the BEUtility. Install Backup Exec 2012 on the new server and apply all of the latest hotfixes and service packs. The…

929 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

8 Experts available now in Live!

Get 1:1 Help Now