Solved

migrate vpn users from a Cisco 3000 VPN concentrator to a Cisco ASA 5520

Posted on 2011-03-24
5
945 Views
Last Modified: 2012-05-11
Have anyone ever done this?..what would be the easiest way to migrate vpn users from a Cisco 3000 VPN concentrator to a Cisco ASA 5520
0
Comment
Question by:cisco_pro30
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
5 Comments
 
LVL 22

Expert Comment

by:Rick Hobbs
ID: 35209119
If they are using the Cisco VPN client, just email them the updated pcf file file from your c:\program files\cisco\VPN client\Profiles directory and have them place it in tat directory.
0
 

Assisted Solution

by:cisco_pro30
cisco_pro30 earned 0 total points
ID: 35209203
I was more concerned about the 3000 being more a webbase gui over the ASA CLI...and migrating my groups from the 3000 to the ASA.
0
 
LVL 22

Accepted Solution

by:
Rick Hobbs earned 500 total points
ID: 35209266
So use the ADSM on the ASA.  It is web based also.
0
 

Author Closing Comment

by:cisco_pro30
ID: 35304313
this wasnt exact what I was looking for..but, I found it. Thanks
0
 
LVL 22

Expert Comment

by:Rick Hobbs
ID: 35320795
Did you use the ADSM or what?
0

Featured Post

Ready to trade in that old firewall?

Whether you need to trade-up to a shiny new Firebox or just ready to upgrade from whatever appliance you're using now, WatchGuard has the right appliance for you! Find your perfect Firebox today with appliance sizing tool!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

624 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question