Solved

PXE Boot Ghost PC over network

Posted on 2011-03-24
1
873 Views
Last Modified: 2012-05-11
I am trying to boot  a PC over a network to connect to our  Ghost server.

Initially I tried botting to the server while on the same switch and VLAN, no problem connecting there.  I then tried booting from a differnt location on our network on a seperate VLAN. This time I reciieved the error message:
PXE-E79: NBP is too big to fit in free base memory

I have options 66 and 67 in DHCP configured correctly. I belive It has something to do with the ghost program loding over differnt VLANS.

Any help would be greatly appreciated and I can answer any questions you may need to reslove this issue.

Thanks

0
Comment
Question by:post_university
1 Comment
 
LVL 5

Accepted Solution

by:
shubhanshu_jaiswal earned 250 total points
Comment Utility
I guess you need to enable helper-address command with ghost ip address on each vlan..
0

Featured Post

Do You Know the 4 Main Threat Actor Types?

Do you know the main threat actor types? Most attackers fall into one of four categories, each with their own favored tactics, techniques, and procedures.

Join & Write a Comment

Suggested Solutions

There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
Getting hacked is no longer a matter or "if you get hacked" — the 2016 cyber threat landscape is now titled "when you get hacked." When it happens — will you be proactive, or reactive?
Viewers will learn how to properly install and use Secure Shell (SSH) to work on projects or homework remotely. Download Secure Shell: Follow basic installation instructions: Open Secure Shell and use "Quick Connect" to enter credentials includi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

744 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now