Link to home
Create AccountLog in
Avatar of infgen
infgenFlag for United States of America

asked on

How to install air-ap1041n-a-k9 in stand alone mode

I have a brand new air-ap1041n-a-k9 access point and it is supposed to be able to be installed in standalone mode on my local LAN. Does anyone have instructions on installing this with out the controller? I have a command line interface that can be used pretty easily.

Thanks,
Doug
ASKER CERTIFIED SOLUTION
Avatar of Les Moore
Les Moore
Flag of United States of America image

Link to home
membership
Create a free account to see this answer
Signing up is free and takes 30 seconds. No credit card required.
See answer
Your model number indicates that it should have came with stand alone mode set as default.  It either picks up an IP via DHCP or you assign a static IP via the CLI, then you can use the web interface to configure the rest of the settings.  Are you having a specific problem with the initial configuration?

KuoH
Avatar of infgen

ASKER

Thank you. I finally got the right power for the unit and your comment allowed me to access the device and set it up easily!