David Logan
asked on
SBS 2003 - Iphone4 Setup.
Hi Guys,
I am a bit of a novice, but manage to get around mosts things. I have 5 Iphones all wanting to use Exchange on our SBS 2003 server. I have went through the SBS+Iphone tutorial on here and got so far.
I can connect to mysever.mydomain.local ok via the router IP address. Our website is hosted by BT so i think i am right in says the DNS records for out domain .org.uk point to bt.
Following the guide and using AS Tester APP on the iphone I am able to connect as follows:
Checking connection : OK
Checking Certificate: Fail
Checking application :OK
Checking version (6.5.7638.1): OK
Checking protocols (1.0,2.0,2.1,2.5): OK
Checking User: OK
ActiveSync is not available.
(activesync detected, but noy correctley configured. (HTTP 500: Forms-Based Auth.
My problem is forms based authentication is off. I cany use testmyexchange because it wont find myserver.mydomain.local. Do I need to have some sort of sub domain setup.
I am totally stuck now.
Thanks
David.
I am a bit of a novice, but manage to get around mosts things. I have 5 Iphones all wanting to use Exchange on our SBS 2003 server. I have went through the SBS+Iphone tutorial on here and got so far.
I can connect to mysever.mydomain.local ok via the router IP address. Our website is hosted by BT so i think i am right in says the DNS records for out domain .org.uk point to bt.
Following the guide and using AS Tester APP on the iphone I am able to connect as follows:
Checking connection : OK
Checking Certificate: Fail
Checking application :OK
Checking version (6.5.7638.1): OK
Checking protocols (1.0,2.0,2.1,2.5): OK
Checking User: OK
ActiveSync is not available.
(activesync detected, but noy correctley configured. (HTTP 500: Forms-Based Auth.
My problem is forms based authentication is off. I cany use testmyexchange because it wont find myserver.mydomain.local. Do I need to have some sort of sub domain setup.
I am totally stuck now.
Thanks
David.
SOLUTION
membership
Create a free account to see this answer
Signing up is free and takes 30 seconds. No credit card required.
Alan Hardisty
Any particular reason for having FBA disabled? If you run the Connect To The Internet Wizard again - it will re-enable it automatically.
ASKER
Hi, No Reason for having FBA Disabled, I will run the wizard again, I have Inisteg running at the moment.
I have been following your Article and it has got me this far, Thanks. I will keep you posted.
I have been following your Article and it has got me this far, Thanks. I will keep you posted.
No problems - shout if you need me for anything.
ASKER
Hi, Inisteg ran ok, with no errors, I ran the connecton wizard again. I only have port 443 open on our router, do I need to open 80 also?.
I am still getting error 500 on connection.
Thanks
David.
I am still getting error 500 on connection.
Thanks
David.
ASKER CERTIFIED SOLUTION
membership
Create a free account to see this answer
Signing up is free and takes 30 seconds. No credit card required.
ASKER
got it sorted, i had to create a new exchange-ome.
Great news - well done and thanks for the points.
Alan
Alan