asked on

Unidentified network.

I have setup two windows server 2008 R2 server to exchagne 2010. I have dual nic on both server. One nice configue for LAN another one for NLB. The NLB was not able to detect as Domain network. When i first set it up it was working ok. We power down the server becasue of the relcoate. And now the NLB nic was not able to detect as Domian Network,, it detects it as Unidentified network.

How can i have this nic to detect as domian network or any way it?

ipv6 disalbed, Binding are ok.

ASKER CERTIFIED SOLUTION

Akhater

membership

Create a free account to see this answer

Signing up is free and takes 30 seconds. No credit card required.

See answer

lena_mo

ASKER

yes example,, Two CAS Server would be 10.1.1.101 and 10.1.230.102
NBL Nic: 10.1.1.104 & 10.1.1.105,, and only with subnet Mask

My connection was ok when i frst set it up. But now it detected as Unidentified network.

Akhater

you are talkinf about the nlb one that is shpwing unidentified right?

Well that is totally normal

lena_mo

ASKER

If this error is on. I can't access my CASArry and can't ping the ip address.

Akhater

You have to look at the error somewhere else

Please give me more details about the setup to see if i can help

lena_mo

ASKER

Two Servers: LAN and NLB Nice
Server 1: Lan:192.168.1.1
NLB: 192.168.1.2
Server2: LAN: 192.168.1.3
NLB: 192.168.1.4
CASARRY IP: 192.168.1.5
ipv6 is off, binding is LAN nic first

Akhater

wait do you mean you actually have LAN and NLB NIC connected to the same switch ? the NLB should be a dedicate vlan on another network

SOLUTION

Akhater

membership

Create a free account to see this answer

Signing up is free and takes 30 seconds. No credit card required.

See answer

lena_mo

ASKER

1. I haven't destroy NLB it.
2. Unicast
3. all NLB and Cassarry are not pingagel.

lena_mo

ASKER

I destroy my NLB and crate new one. I can ping all IP address now. But the network still shows as
Unidentified network