XTADMIN
asked on
How do I create VLANs on Cisco 6509 using layer 3 routing?
We would like to set up layer 3 routing for our new VLAN101 and open the appropriate ports to allow our traffic to move from our existing Enterprise VLAN172 to an intra VLAN101 for our lab workstations. A big goal is to prevent http traffic from hitting our lab pc's while giving them access to the appropriate internal network elements.
We have a Cisco 6509
Existing VLAN's
VLAN Name Status Ports
---- -------------------------- ------ --------- -------------------------- -----
2 WIFI active
3 DMZ active
9 voice active (VOIP) Internet address is 10.9.x.x/24
101 VLAN0101 active (LabNet - New) Internet address is 10.8.x.x/24
172 VLAN0172 active (Enterprise Network) Internet address is 172.16.x.x/16
Looking for guidance on best practice settting this up.
Thanks
MITOG_1
We have a Cisco 6509
Existing VLAN's
VLAN Name Status Ports
---- --------------------------
2 WIFI active
3 DMZ active
9 voice active (VOIP) Internet address is 10.9.x.x/24
101 VLAN0101 active (LabNet - New) Internet address is 10.8.x.x/24
172 VLAN0172 active (Enterprise Network) Internet address is 172.16.x.x/16
Looking for guidance on best practice settting this up.
Thanks
MITOG_1
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER