[Okta Webinar] Learn how to a build a cloud-first strategyRegister Now

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 220
  • Last Modified:

PC

Hi i have a problem every time when i try to install a new windows on computer i need to wait lile 10-15 minutes after windows 7 logo show up. Then it show next step. On my old computer it took like 1-2 minutes. I user asus p5q deluxe. I tried install last bios. I do not know what it cam be. On linux i can not even run setup it just stop and waiting something.
0
umaxim
Asked:
umaxim
  • 5
  • 3
  • 2
  • +1
3 Solutions
 
asiduCommented:
I guess you are booting from CD.

Is your CD ROM drive ok ?
How old is your computer?
Is the harddisk Okie?
Do you have enough RAM?

These are some of the questions you have to address.

If your system can boot from USB try to install from USB stick.
0
 
nobusCommented:
that looks like a hardware problem
post some detailsabout your setup  : cpu, Ram disks, cd drives

note it can be some bad hardware, like a bad disk causing it
then i suggest to download ubcd, and run the disk diag you need - LONG test : http://www.ultimatebootcd.com/      
0
 
Raheman M. AbdulCommented:
Enter eventvwr.msc from start->Run
and see if there are any errors. Looks like device driver issues
0
Concerto Cloud for Software Providers & ISVs

Can Concerto Cloud Services help you focus on evolving your application offerings, while delivering the best cloud experience to your customers? From DevOps to revenue models and customer support, the answer is yes!

Learn how Concerto can help you.

 
umaximAuthor Commented:
Ok i use asus p5q3 deluxe
processor intel quad 9650
video card ati 5870
ram i tried many different from different computer it do not change anything.
I tried install from flash drive cd rom bdrom the same.
0
 
asiduCommented:
What about your hard disk.
Can you confirm its working fine.
Is the hard disk detected okie by your BIOS?

If you have spare hard disk you can do a swap and try.



0
 
nobusCommented:
about your video card -  do you have enough power?  recommended is 600 W :
  ¦500 Watt or greater power supply with two 75W 6-pin PCI Express® power connectors recommended (600 Watt and four 6-pin connectors for ATI CrossFireX™ technology in dual mode)  
from : http://www.amd.com/us/products/desktop/graphics/ati-radeon-hd-5000/hd-5870/Pages/ati-radeon-hd-5870-overview.aspx#3

for the rest, i s uggest to run a disk diagnostic  - best download ubcd, boot from it and run the disk diag for your disk brand - LONG diag
http://www.ultimatebootcd.com/      

this will also show if you have video when booted from it
0
 
umaximAuthor Commented:
i have 600W. I read somewhere in internet it can be because of fdc in my motherboard. I need to turn off fdc.
0
 
nobusCommented:
you mean floppy controller?  never heard that
but check if you've got enough power here : http://www.extreme.outervision.com/psucalculatorlite.jsp
0
 
umaximAuthor Commented:
I check i have enough power supply.
0
 
umaximAuthor Commented:
i found answear it was problem with floppy drive.
0
 
umaximAuthor Commented:
thank you
0

Featured Post

Important Lessons on Recovering from Petya

In their most recent webinar, Skyport Systems explores ways to isolate and protect critical databases to keep the core of your company safe from harm.

  • 5
  • 3
  • 2
  • +1
Tackle projects and never again get stuck behind a technical roadblock.
Join Now