?
Solved

no Internet Cisco 871

Posted on 2011-04-26
2
Medium Priority
?
357 Views
Last Modified: 2012-05-11
Have an 871 Cisco connected to dsl modem in bridge mode with an ipsec tunnel to a main site, dhcp is set up on 871 and hands addresses to clients with dns servers from main site.  Tunnel comes up fine, but they don't have access to internet.  i have nat configured, but not sure what i'm missing.  Anyone help ?  attached is config
muni.txt
0
Comment
Question by:jasonmichel
2 Comments
 
LVL 47

Accepted Solution

by:
Craig Beck earned 2000 total points
ID: 35468055
Change this....

ip nat inside source list 100 interface Vlan1 overload


...to this...

ip nat inside source list 100 interface Fa4 overload
0
 
LVL 1

Author Comment

by:jasonmichel
ID: 35468128
great catch, thanks!
0

Featured Post

Hire Technology Freelancers with Gigs

Work with freelancers specializing in everything from database administration to programming, who have proven themselves as experts in their field. Hire the best, collaborate easily, pay securely, and get projects done right.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

While it is possible to put two routes in place with the secondary having a higher metric, this may not always work. In the event of a failure that does not bring down the physical interface on the router the primary route is not removed. There is a…
It happens many times that access list (ACL) have to be applied to outgoing router interface in order to limit some traffic.This article is about how to test ACL from the router which is not very intuitive for everyone. Below scenario shows simple s…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

750 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question