• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 625
  • Last Modified:

Does the IBM DS3400 configuration correct to support few MS Windows 2003 servers?

This is using a IBM DS3400 storage with fibre optic connection directly to the brocade 10Gb module of the IBM Blade chassic E. There are up to 8 blades. 2 blades are setup with windows 2003 server, and I configured a LUN shared by these 2 servers. Within this LUN, 2 partitions are created, and one allocated to each server.

Now, I saw from the event log that for the 3 errors, believed to be related to the partitions, pls see the attached. What went wrong?
HR-Hos-ntfs-warning-130-2.bmp
HR-Host-ntfs-error-55-2.bmp
HR-Host-ntfs-error-137-2.bmp
0
Balack
Asked:
Balack
1 Solution
 
DavidPresidentCommented:
The RAID controller has no knowledge of what file systems, operating systems, or even what type of computer is accessing the data.  It just responds to SCSI commands to read, write, seek, etc a range of blocks.

These problems should be treated the same as you would a non-RAID disk.  Run a chkdsk as suggested.
0
 
BalackAuthor Commented:
ok
0

Featured Post

Hire Technology Freelancers with Gigs

Work with freelancers specializing in everything from database administration to programming, who have proven themselves as experts in their field. Hire the best, collaborate easily, pay securely, and get projects done right.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now