?
Solved

Sip phone configuration with UC520

Posted on 2011-05-02
7
Medium Priority
?
2,305 Views
Last Modified: 2012-05-11
Hello,
 
We  are using Cisco UC520 for IP telephony, we have 3 branches all are connected over VPN and have 8 Cisco IP Phone configured at the moment , All is working fine But I Need  help for Using a third party SIP soft phone like X-lite with UC520 through Static IP

Can anyone help me ?

Vikrant
0
Comment
Question by:vikrantambhore
  • 4
  • 3
7 Comments
 
LVL 15

Accepted Solution

by:
greg ward earned 2000 total points
ID: 35510160
Config i used

voice register global
 mode cme
 source-address <routerip> port 5060
 max-dn 5
 max-pool 5
 authenticate register
 time-format 24
 date-format D/M/Y
 file text
 create profile

voice register dn  1
 number 1111
 allow watch
 name 1111
 label 1111
!
voice register pool  1
 id mac 0000.0000.0000
 number 1 dn 1
 dtmf-relay sip-notify
 username 1111 password sippassword
 codec g711ulaw

voice service voip
sip
registrar server expires max 3600 min 120

I think thats everything for xlite on the router.
username 1111 password sip pass and the <routerip> will need to be set up by you on both the computer and router...

If you need to change port use
domain address :5061 x-lite
source-address <routerip> port 5061 cisco
http://forums.counterpath.com/viewtopic.php?f=6&t=10326&start=0

Greg
0
 
LVL 6

Author Comment

by:vikrantambhore
ID: 35696082
Hello Greg,

This is working on LAN & over VPN, I need it over Static IP, I should be able to connect through Static IP, Please guide me what need to be done for this

One more question
I need different username & Password for each user, we will have 3 to 4 sip Client that's why we need   different username & Password



Vikrant
0
 
LVL 15

Expert Comment

by:greg ward
ID: 35696647
voice register global
 mode cme
 source-address <routerip> port 5060
where router ip is local to your network
you can translate it for people working outside.
ip nat inside source static udp <routerip> 5060 static ip 54321 route-map POLICY-NAT extendable
or however your nat is configured.
Your sip port then becomes 54321 for outside users and 5060 for inside



voice register dn  2
 number 2222
 allow watch
 name 2222
 label 2222



voice register pool  2
 id mac 0000.0000.0000
 number 1 dn 2
 dtmf-relay sip-notify
 username 2222 password sippassword2
 codec g711ulaw
!

Greg
0
Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

 
LVL 6

Author Comment

by:vikrantambhore
ID: 35696682
Ok,

It's done but From Internet X-lite is unable to register with UC520, All is fine over VPN & LAN

My NAT as per below

ip nat inside source list ToNAT interface Dialer1 overload
!
ip nat inside source static tcp 192.168.2.3 21 interface Dialer1 21
ip nat inside source static tcp 192.168.2.2 2455 interface Dialer1 2455
ip nat inside source static tcp 192.168.2.2 2451 interface Dialer1 2451
ip nat inside source static tcp 192.168.2.2 2453 interface Dialer1 2453
ip nat inside source static tcp 192.168.2.2 2457 interface Dialer1 2457
!
ip access-list extended SplitTunnel
 permit ip 192.168.2.0 0.0.0.255 any
 permit ip 10.1.0.0 0.0.15.255 any
ip access-list extended ToNAT
 deny   ip any 10.0.0.0 0.255.255.255
 deny   ip any 172.16.0.0 0.15.255.255
 deny   ip any 192.168.0.0 0.0.255.255
 permit ip 192.168.2.0 0.0.0.255 any
 permit ip 10.1.0.0 0.0.15.255 any
ip access-list extended acl_nat
 deny   ip 192.168.2.0 0.0.0.255 192.168.4.0 0.0.0.255
 permit ip 192.168.2.0 0.0.0.255 any
ip access-list extended acl_vpn
 permit ip 192.168.2.0 0.0.0.255 192.168.4.0 0.0.0.255
 permit ip 192.168.2.0 0.0.0.255 192.168.8.0 0.0.0.255
 permit ip 10.1.1.0 0.0.0.255 192.168.8.0 0.0.0.255
 permit ip 10.1.1.0 0.0.0.255 10.10.10.0 0.0.0.255



Vikrant
0
 
LVL 15

Expert Comment

by:greg ward
ID: 35696718
ip nat inside source static tcp 192.168.2.1 5060 interface Dialer1 5060
if your routers inside ip is 192.168.2.1

you can change the dialer port from 5060 if you want.

Greg
0
 
LVL 6

Author Comment

by:vikrantambhore
ID: 35696767
Now I am able to connect from Static IP also but I am trying from Android phone & SIP Appl is (SIPDROID) but still Getting error for registering error no is 500


Vikrant
0
 
LVL 6

Author Comment

by:vikrantambhore
ID: 36307692
Hello Greg,

Having Issue there is one way Audio, Unable to hear on Mobile phone, but can hear sound  of mobile user on Cisco IP phone, also i can't make call to 1111 from Cisco IP phone
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Originally, this post was published on Monitis Blog, you can check it here . It goes without saying that technology has transformed society and the very nature of how we live, work, and communicate in ways that would’ve been incomprehensible 5 ye…
Why do some people recommend buying business VoIP from an ISP? What are the benefits to my company? What are the costs?
There's a multitude of different network monitoring solutions out there, and you're probably wondering what makes NetCrunch so special. It's completely agentless, but does let you create an agent, if you desire. It offers powerful scalability …
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

621 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question