AutoQoS Implementation with Avaya VoIP and Cisco Access Points in Lightweight Mode

I have a Cisco LAN including a Cisco WLAN using x Cisco WLC 55xx.  We are using Avaya wireless VoIP phones.

We have implemented QoS using autoqos; however, I do not see the

switchport voice vlan XXX

in the configuration.

I also haven't been able to determine where to apply the autoqos.  Does it go on the port-channel going from the core-switch to the WLC, the individual fiber making up the port-channel, the connections to the LWAPs, or all three.

I haven't been able to find any solid documentation indicating whether this is necessary with Avaya using Cisco LWAP
LVL 20
RPPreacherAsked:
Who is Participating?
 
decoleurConnect With a Mentor Commented:
the voice vlan is applied to a fixed line and not wireless because the switcport puts the voice traffic on a different vlan from the data traffic. wireless is a shared medium and will not differentiate voice from data on a single wlan. what you could do is use a different wlan for voice and tag that as voice traffic for QoS manually. autoqos wasn't intended to support wireless VoIP.

hope this helps,

-t
0
 
QlemoBatchelor, Developer and EE Topic AdvisorCommented:
This question has been classified as abandoned and is closed as part of the Cleanup Program. See the recommendation for more details.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.