How to add T1/E1 interfaces on cisco routers in GNS3

Hi,

   I want to know how to add a T1/E1 interfaces on cisco routers in GNS3? Thanks,

Meth
LordMethAsked:
Who is Participating?
 
koudryConnect With a Mentor Commented:
Hello,

I think it is easy to simulate T1/E1 cards on GNS3 - see http://www.gns3.net/phpBB/topic2908.html?sid=91addd40798e3f25520215c87781d017.

You have T1/E1 cards that you can use on Cisco 7200, 2600 and 3700 platforms.  You need to explore these resources. You may find what you are looking for.

Good luck.
0
 
Robert Sutton JrConnect With a Mentor Senior Network ManagerCommented:
Check out this video, it should help you immensely.

http://www.youtube.com/watch?v=zEN5xBmpUbk&playnext=1&list=PL5CCE39BDEF2ADB81
0
 
602650528Connect With a Mentor Commented:
Hi LordMeth,

No it  isn't possible to emulate E1/T1 card on the GNS3 or dynamips at the moment.  Below is the current list of hardware en=mulated in GNS3.

http://gns3.net/hardware-emulated

cheers.

0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.