• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 629
  • Last Modified:

RTR not supported in newer version of Cisco

New cisco IOS version don't support RTR commands, tit is supported in the older IOS version. RTR is the SLA that I used in the older version. Is there new commands for the newer version?

This is what i used in the older version:

rtr 11
type echo protocol ipIcmpEcho X.X.X.X
timeout 3000
frequency 5
rtr schedule 11 life forever start-time now
0
tech1guy
Asked:
tech1guy
1 Solution
 
John MeggersNetwork ArchitectCommented:
You might check Service Assurance Agent.  IIRC SAA is an updated version of RTR.  See http://www.cisco.com/en/US/docs/ios/12_1/configfun/configuration/guide/fcd301d.html.
0
 
Don JohnstonInstructorCommented:
>New cisco IOS version don't support RTR commands, tit is supported in the older IOS version. RTR is the
>SLA that I used in the older version. Is there new commands for the newer version?

Correct.

Where you used to use the "rtr <entry number>", in new IOS versions, it's "ip sla <entry number>"

After that, most of the commands are the same.


0
 
tech1guyAuthor Commented:
thx donjohnston....it worked.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Ultimate Tool Kit for Technology Solution Provider

Broken down into practical pointers and step-by-step instructions, the IT Service Excellence Tool Kit delivers expert advice for technology solution providers. Get your free copy now.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now