Learn how to a build a cloud-first strategyRegister Now

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 392
  • Last Modified:

Hide number when call

Hello
Plesae I have BCM450 and I have 10 PSTN line connect direct  to it and 10 SIM card connect by GSM  I need to hide number when my employee call to out side

Plesae any idea

Regards
0
nasemabdullaa
Asked:
nasemabdullaa
  • 2
1 Solution
 
BWaringCommented:
Generally, there are two ways to block your Caller ID on outbound calls - either have the telco enable "all call blocking" on the lines, or use the *67 code before each call (*67, area code, phone number). If you want to do it for most calls, then use option 1 (and use *82 to unblock on a per call basis). Be aware that regardless of this, businesses can pay to have your # show anyway...
0
 
nasemabdullaaAuthor Commented:
Thank you for your reply

Plesae I need to block all number for all outbound calls and you say ((either have the telco enable "all call blocking" on the lines))

Can I do this in BCM450 and how I do not know from where I can do that

Regards
0
 
BrianCommented:
You will need to call your telephone service provider to setup all call blocking.
0
 
BWaringCommented:
As I said, if you want it done on all calls, you need to call the telephone company and have "all call blocking" added to each line. It MAY be possible to use the BCM to add a prefix to all calls using optimized or lease cost routing tables, but even so, that is very inefficient. Get your phone bill, call customer service, and tell them you want "all call blocking" added to all your lines.
0

Featured Post

A Cyber Security RX to Protect Your Organization

Join us on December 13th for a webinar to learn how medical providers can defend against malware with a cyber security "Rx" that supports a healthy technology adoption plan for every healthcare organization.

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now