vmware management network

Hello
I have vmware esxi  server installed.My computer has 2x gb network card.
I would like to use of of them management network for configure my esxi server.
How can i do ?
 192.168.1.2 --- management network
 192.168.2.2 --- network for vm
Is that correct?
Thanks
orkinosAsked:
Who is Participating?
 
Andrew Hancock (VMware vExpert / EE MVE^2)Connect With a Mentor VMware and Virtualization ConsultantCommented:
if you want to split your network management and virtual machine network and use two different network cards, you would create another virtual switch.

at present you have a virtula switch called vSwith0, Create a new virtual switch vSwitch1.

and then add a network interface card (you may have to remove from vSwith0), and add the physical network card to vSwitch1.

see here for details

http://www.yellow-bricks.com/2010/03/09/adding-nics-to-your-vswitch-on-esxi/
0
 
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
Pages 13 - 73 Discuss Networking in Detail, iuncluding trunks, VLANs, switches, and load balancing

ESXi Configuration Guide ESXi 4.1

http://www.vmware.com/pdf/vsphere4/r41/vsp_41_esxi_server_config.pdf

Virtual Networking

http://www.vmware.com/technical-resources/virtual-networking/virtual-networks.html

Virtual Networking Concepts

http://www.vmware.com/files/pdf/virtual_networking_concepts.pdf
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.