Link to home
Start Free TrialLog in
Avatar of Mawallace
MawallaceFlag for United Kingdom of Great Britain and Northern Ireland

asked on

Problem with FTP uploads - Network issue

I have a home network that crawls to a halt when any of the PC's uploads using FTP.

What happens is that the home network crawls to an halt. The PC uploading is fine.

I suspect the Netgear DG834 as if I put the PC onto a switch with the other PC's - so that there is only one connection from the switch to the DG834 - while speeds are slow there does not seem to be such an issue.

The minute I plug the PC's into the DG834 ports - the speed grounds to  halt!
Avatar of bigeven2002
bigeven2002
Flag of United States of America image

Hello,

I think we need a little more clarification.  Is the DG834 connected directly to the Internet or is it connected to this other switch that you speak of?  Is the FTP upload slow when uploading to an Internet site or transferring data to another computer on the network?
Have you updated the firmware?


Here's a link some troubleshooting info

http://internetforce.org/iforce/index.php?/links/link/2-netgear-dg834g-manual/

Avatar of Mawallace

ASKER

To clarify - the DG834 has four network ports - 4 computers plugged into that. DG834 also connected to internet. It is internet access and network access that slows down

If you connect another switch - then one lead from switch to the Dg834 - access is fine.

When I follow the link I get - access denied!
If you have not already, go to netgear's website and key in your exact router model number.  This should bring about a firmware update download.

Let me text diagram your setup from what I understood when it halts:

                       Internet
                           v
                      DG834
    v             v              v              v
PC 1        PC 2         PC 3        PC 4

And this is when it acts normal:

                       Internet
                           v
                       DG834
    v             v              v              v
PC 1        PC 2         PC 3      Switch
                                                  v
                                                PC 4

Is this correct?
I have the latest firmware on the DG834 and it made no difference.

I can confirm that you summary of the network is correct
ASKER CERTIFIED SOLUTION
Avatar of bigeven2002
bigeven2002
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial