dickgilbert
asked on
Disable 8dot3name in one volume disk
Hi Experts!!!
I have a one File Server with OS Windows 2008 Server Enterprise.
This Server have a 4 disk.
I need disable 8dot3name for only one disk.
I try the followins commands:
1- fsutil behavior set disable8dot3 VolumeXXXXXXX 1
2 - fsutil behavior set disable8dot3 E: 1
But the system not recognized this command....as a picture
If I try "fsutil behavior query disable8dot3" without especify any disk or volume, this query works fine.
I change the registry value NtfsDisable8dot3NameCreati on to 2 " Enable 8.3 naming convention creation on a per volume basis"
If i try this commando on Windows Server R2, this works fine.
Exist any limitation if I use Windows 2008?
I find articles on microsoft that explain can make this change in a single volume, from Windows 2008 Server
Dibujo2.JPG
Dibujo3.JPG
I have a one File Server with OS Windows 2008 Server Enterprise.
This Server have a 4 disk.
I need disable 8dot3name for only one disk.
I try the followins commands:
1- fsutil behavior set disable8dot3 VolumeXXXXXXX 1
2 - fsutil behavior set disable8dot3 E: 1
But the system not recognized this command....as a picture
If I try "fsutil behavior query disable8dot3" without especify any disk or volume, this query works fine.
I change the registry value NtfsDisable8dot3NameCreati
If i try this commando on Windows Server R2, this works fine.
Exist any limitation if I use Windows 2008?
I find articles on microsoft that explain can make this change in a single volume, from Windows 2008 Server
Dibujo2.JPG
Dibujo3.JPG
Replace your volume of course.....
ASKER
Hi John!
In Windows 2008 Server, is not posible this command.
In Windows 2008 R2 YES, but in Windows Server 2008 not possible.
The command is fsutil behavior set disable8dot3 1
This command disable 8dot, but disable for all disks and volumes, I need disable 8dot3 for one volume, volume I:
In Windows Server 2008 R2 I can disable a one volume with this command --> "fsutil 8dot3name set I: 1"
Any ideas?? I'm desperate :(
In Windows 2008 Server, is not posible this command.
In Windows 2008 R2 YES, but in Windows Server 2008 not possible.
The command is fsutil behavior set disable8dot3 1
This command disable 8dot, but disable for all disks and volumes, I need disable 8dot3 for one volume, volume I:
In Windows Server 2008 R2 I can disable a one volume with this command --> "fsutil 8dot3name set I: 1"
Any ideas?? I'm desperate :(
Im sorry, I dont have a 2008 handy to reference....
ASKER
I think that is a limitation of OS
ASKER
I open a incident with Microsoft. When have solution, I posted!
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Microsoft indicates an error in their documentation, in fact, only in Windows R2 and Windows 7 may be disabled 8dot3name by volume.
Thanks a lot!
Thanks a lot!
ASKER
Microsoft indicates an error in their documentation, in fact, only in Windows R2 and Windows 7 may be disabled 8dot3name by volume.
Thanks a lot!
Thanks a lot!
Try that one....