dash1986
asked on
oracle rac with san installation guide
Hi,
I have 2 HP server using fiber channel connect to EVA 4400.
I have to install oracle RAC and I can't find a detailed, stepbystep guide to install oracle RAC using SAN on Redhat 5.5.
If you have a guide like that, please give me a copy !
Thanks
I have 2 HP server using fiber channel connect to EVA 4400.
I have to install oracle RAC and I can't find a detailed, stepbystep guide to install oracle RAC using SAN on Redhat 5.5.
If you have a guide like that, please give me a copy !
Thanks
ASKER CERTIFIED SOLUTION
membership
Create a free account to see this answer
Signing up is free and takes 30 seconds. No credit card required.
ASKER
I'm trying to create a SAN virtual disk so that 2 server can read-write on it but fail.
How to create it ?
How to create it ?
EVA4400 is HP storage array system (vendor specific).
You might want to contact HP for the SAN setup which is quicker and more accurate.
I can not help too much on this since I only work with NetApp and Dell Storage.
You might want to contact HP for the SAN setup which is quicker and more accurate.
I can not help too much on this since I only work with NetApp and Dell Storage.
ASKER
many thanks. I installed RAC
1. Mount EVA4400 LUN on RHEL5x. Please reference EVA4400 installation guide:
http://www.scribd.com/doc/43753286/EVA4400-Installation-Guide
make sure the LUN is mount as /u01 on RHEL5x
2, Install Oracle RAC
Here is the guide.
Oracle RAC 10g and 11g on CentOS 5.2:
http://wiki.oracle.com/page/Oracle+RAC+10g+and+11g+on+CentOS+5.2