asked on Which type of teaming?
Hi all
I have a SAN server with 5 Gbe Ports, and an Allied Telesyn AT-8000GS/24 Managed Layer 2 Switch.
I am after maximum bandwidth capacity, but unsure on which is the best type of teaming I should go for.
I have:
Adaptive Fault Tolerance - dont think I want this one, only 1 NIC active
Adaptive Load Balancing - Maybe?
Static Link Aggregation - Sounds promising
IEEE 802.3ad Dynamic Link Aggregation - Unsure of difference to SLA.
I have a SAN server with 5 Gbe Ports, and an Allied Telesyn AT-8000GS/24 Managed Layer 2 Switch.
I am after maximum bandwidth capacity, but unsure on which is the best type of teaming I should go for.
I have:
Adaptive Fault Tolerance - dont think I want this one, only 1 NIC active
Adaptive Load Balancing - Maybe?
Static Link Aggregation - Sounds promising
IEEE 802.3ad Dynamic Link Aggregation - Unsure of difference to SLA.
NetworkingSwitches / HubsNetwork Analysis
Last Comment
hongedit
ASKER CERTIFIED SOLUTION
THIS SOLUTION ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
ASKER
Ok, so I need to configure LACP then on the swich?
SOLUTION
THIS SOLUTION ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
ASKER
Thanks