<div>
intervlan routing is missing. Also you can propagate vlan info using vtp. SwA and swB can do routing for you. &nbsp;2900 is a L2 switch. <br />
<br />
However, copy pasting blindly is going to lure you into trouble. It;s better if you take a patient read about vlan and how it works and how you will configure.<br />
<br />
If you do not know what you are doing, chances are you will seldom succeed.<br />
<br />
Best,<br />

</div>


intervlan routing is missing. Also you can propagate vlan info using vtp. SwA and swB can do routing for you.  2900 is a L2 switch.

However, copy pasting blindly is going to lure you into trouble. It;s better if you take a patient read about vlan and how it works and how you will configure.

If you do not know what you are doing, chances are you will seldom succeed.

Best,


<div>
This question has been classified as abandoned and is closed as part of the Cleanup Program. See the recommendation for more details.
</div>


This question has been classified as abandoned and is closed as part of the Cleanup Program. See the recommendation for more details.

<div>
<div class="content wysiwyg-content">
I have three switches A, B, C – Switch A is my distribution switch (Cisco 3750) &nbsp;, Switch &nbsp;B is a <br />
Cisco Catalyst 3560 series switch with VLAN 1 (192.168.1.X ) configured. Switch C is a Cisco Catalyst 2950 VLAN 2 (10.6.3.X). &nbsp;I need to know how to configure the switches to enable Nodes on &nbsp;Switch B (VLAN 1) with IP 192.168.1.X communicate with Nodes on &nbsp;Switch C (VLAN 2) using 10.6.3.X.<br />

</div>
</div>


I have three switches A, B, C – Switch A is my distribution switch (Cisco 3750)  , Switch  B is a 
Cisco Catalyst 3560 series switch with VLAN 1 (192.168.1.X ) configured. Switch C is a Cisco Catalyst 2950 VLAN 2 (10.6.3.X).  I need to know how to configure the switches to enable Nodes on  Switch B (VLAN 1) with IP 192.168.1.X communicate with Nodes on  Switch C (VLAN 2) using 10.6.3.X.


Enabling communication between different VLANs  on two switches

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.

Switches / Hubs

A router is a networking device that forwards data packets between computer networks. Routers perform the "traffic directing" functions on the Internet. The most familiar type of routers are home and small office cable or DSL routers that simply pass data, such as web pages, email, IM, and videos between computers and the Internet. More sophisticated routers, such as enterprise routers, connect large business or ISP networks up to the powerful core routers that forward data at high speed along the optical fiber lines of the Internet backbone. Though routers are typically dedicated hardware devices, use of software-based routers has grown increasingly common.