PaulBurton83709
asked on
HP Procurve 2626 (J4900A)
I have an HP Procurve 2626 connecting a flat network. I and looking for the config instructions to globally drop or reject port 62346. It has been too many years since I have configured a switch and am at a loss as to the syntax to create this rule. Specifically, I don't know if I can do it from just enable mode or if I need to go into each interface to achieve my desires result.
You can't on a 2626......
This doc from HP indicates you can do it...
http://cdn.procurve.com/training/Manuals/Security-Dec2008-59906024-Chap10-Traf-Security-Filts.pdf
http://cdn.procurve.com/training/Manuals/Security-Dec2008-59906024-Chap10-Traf-Security-Filts.pdf
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
@d3ath5tar - you are correct... I didn't read the doc correctly!
Also I've just logged in to my own 2626 to satisfy my own doubts and you most definitely can't do it.
Also I've just logged in to my own 2626 to satisfy my own doubts and you most definitely can't do it.
No worries :)
ASKER
Thanks for your responses. What 24 and 48 port switches add that functionality?
You're looking at a 3500yl series for that functionality,