We run a modem server (Multitech 8 port PCI RAS card ) on a windows 2003 server hardware is dell 2950 server.
We are experiencing a lot of dial up failures (failed to connect) from our application which uses the 1st available free port to dial out. When I check using hyperterminal I can see that a port is busy (no dialtone) and that ports are free as they will dial my number.
I know the hardware works.
What I am looking for however is any way of telling if there are JOBS queueing trying to use a specific modem port or what the modem is doing at a particualr time (ie dialing, busy, locked up!!!)
Just like a print queue.
Does anyone know of any MODEM QUEUE monitoring software which will help me in this