Solved

Windows 2008 r2 make remote desktop available by user right

Posted on 2011-09-02
9
381 Views
Last Modified: 2013-11-21
I have one windows 2008 r2 gateway server configured. Also one remote desktop server installed for a client. My servers are all in the same domain (with domain controller)

Now I want to make the particular server (remote desktop) available to my client. I don't know how.

For every new client I want to make another remote desktop server available, depending of the group they are in.

So when you logon via the Gateway; when you login with username client1 you have to be redirected to the remote desktop server of client1. Client2 for remote desktop server 2 etc.

Any ideas ?
0
Comment
Question by:thisis_it
  • 4
  • 2
9 Comments
 
LVL 2

Expert Comment

by:nat_nz
ID: 36501056
you need to ensure that the users are setup on the server, in active directory, make the user, ensure that dial in is enabled for the user.........
0
 

Author Comment

by:thisis_it
ID: 36501073
NATnz, True, but those are the basics. I need a solution for this issue. Thanks.
0
 
LVL 2

Expert Comment

by:nat_nz
ID: 36518058
Are you utilising Microsoft TS Session Broker on your gateway?
0
Free learning courses: Active Directory Deep Dive

Get a firm grasp on your IT environment when you learn Active Directory best practices with Veeam! Watch all, or choose any amount, of this three-part webinar series to improve your skills. From the basics to virtualization and backup, we got you covered.

 

Assisted Solution

by:thisis_it
thisis_it earned 0 total points
ID: 36522634
no, I don't have session broker services
0
 

Accepted Solution

by:
thisis_it earned 0 total points
ID: 36963810
Nothing happened. I think there is none available..
0
 

Author Closing Comment

by:thisis_it
ID: 36984609
No solution available
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Issue: One Windows 2008 R2 64bit server on the network unable to connect to a buffalo Device (Linkstation) with firmware version 1.56. There are a total of four servers on the network this being one of them. Troubleshooting Steps: Connect via h…
Experts-Exchange users below are the steps you can follow to upgrade your Lync server to latest CU's or cumulative updates. Note: Perform it during non-production hours.   Step 1: Backup your lync and SQL server database. Follow below article: h…
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
Windows 8 came with a dramatically different user interface known as Metro. Notably missing from that interface was a Start button and Start Menu. Microsoft responded to negative user feedback of the Metro interface, bringing back the Start button a…

821 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question